Figure B-7. Positioning the Rack Slides (using Option 923 - standard adapters).
Appendix B
4. From the bottom channel nut inserted in Step 3, count up four holes.
Slide a channel nut over the corresponding hole on the inside vertical
rail (Figure B-7). Install a second channel nut on the inside rail four
holes above the first nut. Repeat for the other rail. Install channel nuts
on the corresponding holes on the rear inside rails.
Left Vertical Rail
(Front)
Channel Nuts On
Center Holes
Four
Holes
Channel Nuts On
Center Holes
Right Vertical Rail
(Front)
Channel Nuts
For Rack
Slides
Rack Mounting and Option Installation
237