Table of Contents
Advertisement
:TREMaining?
:TRESet
:VOLTage
:CONDition?
:ENABle
:[EVENt]?
:LEVel?
:PTR
:SCONdition?
:SYSTem
:BEEPer
:FREQuency
[:IMMediate]
:STATe
:TIME
:BLOWer:STATe
:COMMunicate
:SERial
:CONTrol
:RTS
:ECHO
:ERESponse
:LBUFfer
:PRESet
[:ALL]
:RAW
:TERM
[:RECeive]
:BAUD
:BITS
:PACE
:PARity
[:TYPE]
:SBITs
:VXI:ADDRess?
:DATE:LMA?
:ERRor?
:FACTory
:HELP:HEADers?
:MODel?
:NAME
:NVDefault
:NVRecall
:NVSave
:POWer
:CYCLe?
:SOURce?
:STATus?
:SNUMber
186 Programming the Enhanced Monitor
[query only] Returns the time remaining.
[no query]
[query only] Returns the contents of the Voltage condition register
<mask>
[query only] Returns the contents of the Voltage event register
<supply>
[query only] Returns the last power supply voltage measurement.
<mask>
[query only] Returns monitor pass/fail condition
<frequency>
[<freq>[,<dur>]]
[no query]
<state>
<duration>
<state>
<rts>
<echo>
<eresponse>
<lbuffer>
[no query]
[no query]
[no query]
<baud>
<bits>
<style>
<parity>
<bits>
<address>
[query only] Returns the VXI address of the enhanced monitor.
[query only] Returns date of last factory maintenance
[query only] Returns error numbers and messages
[no query]
[query only] Returns all the legal SCPI commands and queries.
[query only] Returns model number of the mainframe.
<name>
[no query]
[no query]
[no query]
<state>
[query only] Returns number of mainframe power cycles since
[query only] Returns the source of power for the enhanced monitor.
[query only] Returns status of three power on/off controlss.
<string>
Resets the user countdown timer.
Sets/returnse Voltage enable register
Sets/returns the voltage positive transition filter.
Sets/returns the beeper's pitch.
Causes the mainframe to beep.
Enables/Disables the beeper, returns beeper state
Sets/returns the beeper's duration.
Sets/returns status of mainframe fans. (ON, VARiable)
Sets/returns the control value for RS-232 communication.
Sets/returns the state of echoing characters.
Sets/returns the state of immediate error reporting.
Sets/returns the state of line buffering.
Presets RS-232 settings to default (TERM).
Presets RS-232 settings for use with a computer.
Presets RS-232 settings for use with a dumb terminal.
Sets/returns the baud rate for RS-232 communication.
Sets/returns the number of bits for RS-232 communication.
Sets/returns the pacing style for RS-232 communication.
Sets/returns the parity for RS-232 communication.
Sets/returns the number of stop bits for RS-232
communication.
Alias for SYSTem:NVD
Sets/returns system name for mainframe.
Resets many of the mainframe settings to factory defaults.
Recalls mainframe settings stored in non-volatile memory.
Stores many mainframe settings to non-volatile memory.
Set/returns mainframe power (ON,OFF).
manufacture.
Sets/returns the serial number of the mainframe.
Chapter 3
Advertisement
Table of Contents
