Status:questionable:blower:event - HP E8402A User And Service Manual

STATus:QUEStionable:BLOWer:EVENt?

Returned Data
Comments
Reset Condition
Related
Commands
Chapter 3
The
STATus:QUEStionable:BLOWer:EVENt?
the value of the event register for the BLOWer status group.
The event register latches positive transition events from the blower condition
register. A positive transition occurs when a condition makes a transition from a low
to a high state. Bits in the event register are latched, and once set, they remain set
until cleared by a STATus:QUEStionable:BLOWer:EVENt?
status). There is no buffering; so while an event bit is set, subsequent events
corresponding to that bit are ignored. Event registers are read only.
Type Range
int16 0 - 32767
•
Refer to STATus:QUEStionable:BLOWer:CONDition?
bit in the BLOWer status group.
•
Cleared by: *CLS, power-on, and by reading the event register.
*RST does not affect the status system, use *CLS to clear all event registers.
STATus:QUEStionable:BLOWer:CONDition?,
STATus:QUEStionable:BLOWer:ENABle, *CLS
query returns an integer representing
Default
none Bit mask indicating which events are set (1)
or cleared (0) for the BLOWer status group.
Programming the Enhanced Monitor
query or *CLS (clear
Description
for a description of each
97