System:communicate:serial:eresponse <Eresponse> System:communicate:serial:eresponse - HP E8402A User And Service Manual

SYSTem:COMMunicate:SERial:ERESponse < eresponse >
SYSTem:COMMunicate:SERial:ERESponse?
Parameters
Returned Data
Reset Condition
Related
Commands
134 Programming the Enhanced Monitor
SYSTem:COMMunicate:SERial:ERESponse
reporting. Parameter choices are: ON and OFF. If ON, the Enhanced Monitor's
response queue is emptied and transmitted over the RS-232 interface at any carriage
return or line feed received (after the command is parsed and acted on). This is useful
when using a "dumb" terminal connected to the mainframe so that errors are
immediately apparent. If set to OFF, the error queue remains intact unless a
SYSTem:ERRor? is executed.
Note: any word serial errors are also emptied.
SYSTem:COMMunicate:SERial:ERESponse?
representing the state of immediate error reporting.
Name Type
< eresponse > Boolean
Type Range
Boolean 0, 1 Immediate error reporting. 0 is OFF, 1 is ON
*RST resets ERESponse to the last value saved by the SYST:NVS command.
SYSTem:COMMunicate:PRESet:TERMinal
sets the state of immediate error
returns an integer (0 or 1)
Range Default
ON, OFF, On Immediate error reporting. 0 is OFF, and 1
0, 1 is ON.
Description
Description
Chapter 3