System:communicate:serial:lbuffer <Lbuffer> System:communicate:serial:lbuffer - HP E8402A User And Service Manual

SYSTem:COMMunicate:SERial:LBUFfer < lbuffer >
SYSTem:COMMunicate:SERial:LBUFfer?
Parameters
Returned Data
Reset Condition
Related
Commands
Chapter 3
SYSTem:COMMunicate:SERial:LBUFfer
choices are: ON and OFF. If ON, the Enhanced Monitor buffers each character
received over the RS-232 port until a carriage return or linefeed is received. At that
time, the entire command line is parsed and acted on. This is useful when using a
"dumb" terminal to connect to the mainframe so that backspacing is possible;
backspacing is not possible if LBUF is turned off.
SYSTem:COMMunicate:SERial:LBUFfer?
state of line buffering.
Name Type Range
< lbuffer > Boolean ON, OFF
0, 1
Type Range
Boolean 0, 1
*RST resets LBUFfer to the last value saved by the SYST:NVS command.
SYSTem:COMMunicate:PRESet:TERMinal
sets the state of line buffering. Parameter
returns an integer(0 or 1) representing the
Default
On Line buffering state. 0 is OFF, and 1 is ON.
Description
Line buffer state 0 is OFF, 1 is ON
Programming the Enhanced Monitor
Description
135