History:temperature:maximum? <Slot> History:temperature:minimum? <Slot - HP E8402A User And Service Manual

HISTory:TEMPerature:MAXimum? < slot >
HISTory:TEMPerature:MINimum? < slot >
Parameters
Returned Data
Comments
Error Conditions
Reset Condition
Related
Commands
78 Programming the Enhanced Monitor
HISTory:TEMPerature:MAXimum?
the maximum temperature measured by the Enhanced Monitor for the <slot> since
either manufacture of the mainframe or the most recent HIST:RES:TEMP
HIST:RES:ALL.
HISTory:TEMPerature:MINimum?
the minimum temperature measured by the Enhanced Monitor for the <slot> since
either manufacture of the mainframe or the most recent HIST:RES:TEMP.
Name Type
< slot > enum. OUT0...OUT12,
DELTa0...DELTa12,
AMBient
Type Range
float
•
The maximum/minimum temperature tracking can be zeroed by the
commands.
HISTory:RESet
The following table lists the most common error conditions and causes. Error
numbers and corresponding messages can be found using
Number Message
-109 "Missing parameter"
-224 "Illegal Parameter"
-311 "Memory error"
A *RST has no effect on the HISTory subsystem.
HISTory:TEMPerature:[HISTogram]?, HISTory:RESet:TEMPerature,
HISTory:RESet[:ALL]
<slot> returns a single floating point number for
<slot> returns a single floating point number for
Range Default
none
minimum or maximum temperature
You must include the < event index > parameter.
the <slot> parameter was not correct.
the historical data's memory is not available.
Description
Exhaust temperature for slots 0 - slot
12
Temperature change above the
ambient temperature for slots0 - slot
12
Entrance air temperature
Description
SYSTem:ERRor?
Probable Cause
or
query.
Chapter 3