History:voltage:cmaximum? <Supply> History:voltage:cminimum? <Supply - HP E8402A User And Service Manual

HISTory:VOLTage:CMAXimum? < supply >
HISTory:VOLTage:CMINimum? < supply >
Parameters
Returned Data
Comments
Error Conditions
Reset Condition
Related
Commands
Chapter 3
HISTory:VOLTage:CMAXimum?
by the Enhanced Monitor for the <supply> since power-on of the mainframe.
HISTory:VOLTage:CMINimum?
by the Enhanced Monitor for the <supply> since power-on of the mainframe.
Name Type Range
< supply > enum. P5,P12,N12,P24,
N24,N5PT2,N2,
P5STby
Type Range
float.
•
These maximums and minimums can be reset by powering the mainframe off
and then powering it back on.
The following table lists the most common error conditions and causes. Error
numbers and corresponding messages can be found using
Number Message
-224 "Illegal Parameter"
A *RST has no effect on the HISTory subsystem.
HISTory:VOLTage:MAXimum?, HISTory:VOLTage:MINimum?,
HISTory:VOLTage:[HISTogram]?
<supply> returns the maximum voltage measured
<supply> returns the minimum voltage measured
Default
none Selects the power supply for the current
maximum request. P5 is positive 5 Vdc
supply, N12 is negative 12 Vdc supply,
etc.
Description
Minimum or maximum voltage.
The <supply> parameter was not correct.
Programming the Enhanced Monitor
Description
SYSTem:ERRor?
Probable Cause
query.
85