Power-on/Power-off Sequence
Listed below are the sequences for powering on and off a fully
connected system. Simply stated, your target system is always the
last to be powered on, and the first to be powered off.
To power on HP 16600 and HP 16700 series logic
analysis systems
Ensure the target system is powered off.
Turn on the logic analyzer. The Setup Assistant will guide you
1
through the process of connecting and configuring the analysis probe.
When the analysis probe is connected to the target system and logic
2
analyzer, and everything is configured, turn on your target system.
To power on all other logic analyzers
With all components connected, power on your system in the following order:
Logic analysis system.
1
Your target system.
2
To power off
Turn off power to your system in the following order:
Turn off your target system.
1
Turn off your logic analysis system.
2
2–4
HP E2416B 80196 Analysis Probe