Backplane
Shields
Figure B-14. Positioning the Backplane Shields on the Connectors.
Appendix B
Backplane
2. To install the screws, firmly press the screw onto a Torx driver. This
prevents the screw from falling off as you reach into the mainframe.
Placing a sheet of paper under the backplane connectors will catch
screws if they fall.
3. Tighten the screws by turning them clockwise. The screws are
thread-forming and will go in slowly when you install them the first
time.
Backplane
Rack Mounting and Option Installation
Backplane
Shields
247