Table of Contents
Advertisement
Removing the
Mainframe Cover
208 Servicing Your Mainframe
1. Turn off the mainframe and remove the power cord.
2. Remove the rear panel. Refer to "Removing the Rear Panel from the
Mainframe" on page 207 for instructions.
3. Remove the mainframe cover by removing the ten m3x6 flat head
torx screws (five on each side of the mainframe). Refer to Figure 5-2.
Figure 5-2. Removing the Mainframe Cover
Remove 5 Screws From Each Side
Chapter 5
Advertisement
Table of Contents
