Table of Contents
Advertisement
DISPlay[:WINDow]:STATe <state>
DISPlay[:WINDow]:STATe?
Parameters
Returned Data
Error Conditions
Reset Condition
60 Programming the Enhanced Monitor
DISPlay[:WINDow]:STATe
AUTO).
is the default, and means the display is always on when the mainframe
ON
is powered up.
OFF
disables the display window and it is dark.
Display in screen saver mode where the display will turn off when no keys are
pressed for 10 minutes.
DISPlay[:WINDow]:STATe?
data is a string (enumerated); either ON, OFF, or AUTO.
Name
Type
< state >
enum.
ON,OFF,AUTO
Type
Range
enum
ON,OFF,AUTO
The following table lists the most common error conditions and causes. Error
numbers and corresponding messages can be found using
Number
Message
-109
"Missing Parameter"
-221
"Settings Conflict"
-224
"Illegal Parameter"
At *RST, DISPlay[:WINDow]:STATe is set to ON.
sets the state of the mainframe's display (ON, OFF,
returns the state of mainframe's display. The returned
Range
Default
ON
State of Display
The <state> parameter was omitted.
The mainframe's power is off.
The <state> parameter was not correct.
AUTO
places the
Description
State of Display
Description
SYSTem:ERRor?
query.
Probable Cause
Chapter 3
Advertisement
Table of Contents
