Table of Contents
Advertisement
SYSTem:BEEPer:TIME < duration >
SYSTem:BEEPer:TIME?
Parameters
Returned Data
Comment
Reset Condition
Related
Commands
130 Programming the Enhanced Monitor
SYSTem:BEEPer:TIME
stored in non-volatile memory with the SYSTem:NVSave command.
SYSTem:BEEPer:TIME?
of the beeper.
Name
Type
< duration >
float32
0.01 - 2.0, MIN, MAX,
DEF
Type
Range
float32
0.01 - 2.0
•
The duration is used in
conditions in the mainframe.
•
Out of range values for <duration> do not cause the mainframe to generate an
error. Instead, the duration is set to the closest value within the valid range.
*RST resets beeper duration to the last value saved by the SYST:NVS command.
SYSTem:BEEPer:FREQuency, SYSTem:NVSave
<duration> sets the duration of the beeper. The duration is
returns a floating point number representing the duration
Range
Default
0.2
Beeper duration.
SYTS:BEEP:IMM
(when using defaults) and in warning
Description
Duration of beep in seconds
Description
Chapter 3
Advertisement
Table of Contents
