How Can I Communicate With A Test System - HP 81200 User Manual

How Do I Use Events?
HP 81200 Data Generator/Analyzer Platform User Guide, Revision 2.1

How Can I Communicate With a Test System?

In this bolt-on example our instrument is integrated into a large IC test
system. We shall run a measurement that is selected via the trigger input
pod.
The result is a pass /fail signal that is returned to and examined by the large
IC tester.
1 Define four events.
Figure 130 Definition of Pod and Error Events
2 Create the sequence and fill in the branch tables.
Note that we use a one-terminal data input (= generator output) port and
two segments to generate and return the pass /fail signal.
Figure 131 Sequence and Branch Tables
Remarks:
The "Meas_1" and "Meas_2" blocks need to be longer than the actual
measurement so that all analyzer pipelines are toggled through and the
events are completely processed.
How Do I ... ?
If Go to
Measure1 Meas_1
Measure2 Meas_2
Measure1 Meas_1
Measure2 Meas_2
Error Failed
Ok PASSED
Error Failed
Ok PASSED
225