D Contest Number Set Mode - Icom IC-i7410 Instruction Manual

4
RECEIVE AND TRANSMIT
■ Electronic keyer functions (continued)

D Contest number Set mode

This mode is used to set the contest number and count
up trigger, etc.
• Setting contents
q In the CW mode, push [MENU] to display the "M1"
screen (Menu 1).
w Push [KEY](F-4) to display the "KEY" screen (Mem-
ory Keyer).
e Push [001](F-4) to enter the Contest Number Set
mode.
r Push [Y](F-1) or [Z](F-2) to select the desired
item.
t Rotate [DIAL] to select the desired option.
• Hold down [F-3] for 1 second to reset to the default set-
ting, if desired.
y Push [MENU] to save, and return to the "KEY"
screen.
u Push [MENU] again to return to the "M1" screen.
1. Number Style
This item sets the numbering system used for contest
numbers— normal or short morse numbers.
Short morse numbers are also referred to as "cut"
numbers.
• Normal : Does not use short morse numbers
• 190➔ANO : Sets 1 as A, 9 as N and 0 as O.
• 190➔ANT : Sets 1 as A, 9 as N and 0 as T.
• 90➔ NO : Sets 9 as N and 0 as O.
• 90➔ NT : Sets 9 as N and 0 as T.
2. Count Up Trigger
Set the count-up trigger to one of four memory slots
for the contest number exchange. The count-up trigger
allows the contest number to automatically advance
after each complete serial number exchange is sent.
• M1, M2, M3 or M4 can be set.
3. Present Number
This item shows the current number for the count-up
trigger channel set above.
• Rotate [DIAL] to change the number, or hold down
[F-3](CLR) for 1 second to reset the current number
to 001.
41
(Default: Normal)
(Default: M2)
(Default: 001)
Number Style
001
∫ √
1
Select the item Reset to the default
setting
N o r m a l