Memory Operation; General Description; D Memory Channel Contents; Memory Channel Selection - Icom IC-i7410 Instruction Manual

7

MEMORY OPERATION

■ General description

The transceiver has 101 Memory channels (99 regular,
and 2 scan edges). The Memory mode is very useful
to quickly change to often-used frequencies.
Memory Channels
1–99
P1, P2

D Memory channel contents

The following information can be programmed into
Memory channels:
• Operating frequency (p. 26)
• Operating mode (p. 31)
• IF filter number (p. 57)
• Split data (p. 66)
• Memory name (p. 73)
• Repeater tone encoder (p. 51), or tone squelch ON/
OFF (p. 50)
• Repeater tone frequency (p. 52) or tone squelch fre-
quency (p. 50)

■ Memory channel selection

D Selection in the VFO mode

q Push [VFO/MEMO] to select the VFO mode.
w Push [Y] or [Z] to select a Memory channel num-
ber.
• All Memory channels, including blank channels, can be
selected.
• " " appears when no information has been pro-
grammed into the Memory channel. (Blank channel)
e Push [VFO/MEMO] to select the Memory mode.
• "MEMO" and contents of the Memory channel appear.

D Selection in the Memory mode

q Push [VFO/MEMO] to select the Memory mode.
w Push [Y] or [Z] to select a Memory channel.
• All Memory channels, including blank channels, can be
selected.
• " " appears when no information has been pro-
grammed into the Memory channel. (Blank channel)
• Memory channels can also be selected using the micro-
phone [UP]/[DN] keys. In such case, the blank channels
are skipped.
69
Regular Memory channels with Split frequency capability.
Program Scan Edge Memory channels with only Simplex capability.
Stores the scan edge frequencies for the programmed scan.
While in the memory mode, all 101 Memory channels
are tunable, which means the programmed frequency
can be tuned temporarily with [DIAL].
Descriptions
NOTE:
Memory data can be erased by static electricity, elec-
tric transients, etc. In addition, they can be erased by
malfunction and during repairs. Therefore, we recom-
mend that memory data be backed up.
[√]
Appears if the selected Memory
channel has no information.
While in the VFO mode
M1
A G C
While in the Memory mode
M1
A G C
[∫] [VFO/MEMO]
T B W S C P
T B W S C P