D Contest Number Set Mode - Icom i9100 Instruction Manual

4
RECEIVE AND TRANSMIT
■ Electronic keyer functions (Continued)

D Contest number Set mode

This mode is used to set the contest number, count up
trigger and Present number.
• Setting contents
q In the CW mode, push [MENU] to display the "M1"
screen (Menu 1).
w Push [KEY](F-4) to display the "KEY" screen (Mem-
ory Keyer).
e Push [001](F-4) to enter the Contest Number Set
mode.
r Push [Y](F-1) or [Z](F-2) to select the desired
item.
t Rotate [MAIN DIAL] to select the desired option.
• Hold down [F-3] for 1 second to reset to the default set-
ting, if desired.
y Push [MENU] to save, and return to the "KEY"
screen (Memory Keyer).
u Push [MENU] to return to the "M1" screen (Menu 1).
Number Style
1.
This item sets the numbering system used for contest
numbers— normal or short morse numbers.
Short morse numbers are also referred to as "cut"
numbers.
• Normal : Does not use short morse numbers
• 190➔ANO : Sets 1 as A, 9 as N and 0 as O.
• 190➔ANT : Sets 1 as A, 9 as N and 0 as T.
• 90➔ NO : Sets 9 as N and 0 as O.
• 90➔ NT : Sets 9 as N and 0 as T.
Count Up Trigger
2.
Set the count-up trigger to one of four memory slots
for the contest number exchange. The count-up trigger
allows the contest number to automatically advance
after each complete number exchange is sent.
• M1, M2, M3 or M4 can be set.
Present Number
3.
This item shows the current number for the count-up
trigger channel set above.
• Rotate [MAIN DIAL] to change the number, or hold
down [CLR](F-3) for 1 second to reset the current
number to 001.
53
(Default: Normal)
(Default: M2)
(Default: 001)
Number Style
001
∫ √
1
Select the item Reset to the default
setting
N o r m a l