D Contest Number Set Mode - Icom IC-7100 Instruction Manual

Previous view
4
RECEIVE AND TRANSMIT
Electronic keyer functions (Continued)
D
Contest number Set mode
This mode is used to set the contest number, count up
trigger and Present number.
• Setting contents
q In the CW mode, push
MENU
to select the "M-2" screen (M-2 menu).
w Push [KEYER](D) to display the "KEYER SEND"
screen.
• If the "KEYER" (Root) screen is displayed, skip step e.
e
Push (C) to display the "KEYER" screen.
MENU
r D) to enter the "KEYER 001" (Contest
Push [001](
Number Set) screen.
t
Touch the desired item to select.
y
Touch the desired option or rotate the Dial to change
the setting.
• If desired, touch the item for 1 second to open the Default
set window, then select "Default" to reset to the default
setting.
u
Push (C) to return to the "KEYER" (Root)
MENU
screen.
Number Style
This item sets the numbering system used for contest
numbers— normal or short morse numbers.
Short morse numbers are also referred to as "cut"
numbers.
• Normal: Does not use short morse numbers
• 190➔ANO: Sets 1 as A, 9 as N and 0 as O.
• 190➔ANT: Sets 1 as A, 9 as N and 0 as T.
• 90➔NO: Sets 9 as N and 0 as O.
• 90➔NT: Sets 9 as N and 0 as T.
Count Up Trigger
Set the count-up trigger to one of four memory slots for
the contest number exchange. The count-up trigger al-
lows the contest number to automatically advance after
each complete number exchange is sent.
• M1, M2, M3 or M4 can be set.
Present Number
This item shows the current number for the count-up
trigger channel set above.
• Touch [+] or [–] or rotate the Dial to change the
(D)
number.
• Hold down the item for 1 second to display the default
set window, then touch "Default" to set the counter to
"001."
(C) one or more times
(Default: Normal)
(Default: M2)
(Default: 001)
4-9
The L, R, C or D in the instructions indicate the
part of the controller.
L: Left side, R: Right side, C: Center bottom
D: Display (Touch panel)
• Contest number Set mode
"KEYER" (Root) screen
• To the default setting
• Default set window
Touch [001]
Touch the item
( Example: Num-
ber Style)
Touch the option
( Example:
190➔ANO)
Touch the item
for 1 second.
Touch "Default."