D Contest Number Set Mode; Number Style; Present Number - Icom IC-746PRO Instruction Manual

D Contest number set mode

This menu is used to set the contest (serial) number
and count up trigger, etc.
• Setting contents
q Push [MENU] to select M1, then push [F4 KEY] to
select the memory keyer menu.
w Push [F4 001] to enter the contest number set
mode.
e Push [F1≤] or [F2 ≥] to select the desired set item.
r Set the desired condition using the tuning dial.
• Push [F3] for 1 sec. to select a default condition or value.
t Push [MENU] 2 times to return to M1.

1. Number Style

This item sets the numbering system used for contact
(serial) numbers— normal or morse cut numbers.
• Normal : Does not use morse cut number
(default)
• 190 ANO : Sets 1 as A, 9 as N and 0 as O.
• 190 ANT : Sets 1 as A, 9 as N and 0 as T.
• 90 NO : Sets 9 as N and 0 as O.
• 90 NT : Sets 9 as N and 0 as T.
2. Count Up Trig
This item sets the count up trigger channel.
• M1, M2, M3 and M4 can be set. (default: M2)

3. Present Number

This item shows the current number for the count up
trigger channel set above.
• Rotate the tuning dial to change the number, or push
[F3 CLR] for 1 sec. to reset the current number to 001.
RECEIVE AND TRANSMIT
S i d e T o n e L e v e l
1
F 1 F 2 F 3
Set item up/down
N u m b e r S t y l e
1
C o u n t U p T r i g
2
P r e s e n t N u m b e r
3 C L R
4
5 O %
F 4 F 5
N o r m a l
M 2
0 0 1
32