Icom IC-i7410 Instruction Manual page 119

• OPC-599
adapter cable
13-pin, ACC connector to 7-pin + 8-pin ACC connector.
• MB-123
carrying handle
Convenient when carrying the transceiver.
The same as that supplied with the transceiver.
• OPC-420
shield control cable
For the connection between transceiver and the AH-4.
• RS-BA1
ip remote control software
To remotely control radios using the RS-BA1, BE SURE
that you comply with your local regulations.
Approved Icom optional equipment is designed for
optimal performance when used with an Icom trans-
ceiver.
Icom is not responsible for the destruction or damage
to an Icom transceiver in the event the Icom trans-
ceiver is used with equipment that is not manufac-
tured or approved by Icom.
16
OPTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
112