Options - Icom IC-i7410 Instruction Manual

16

OPTIONS

■ Options
IC-PW1/EURO HF/50 MHz ALL BAND 1 kW LINEAR AMPLIFIER
Full-duty 1 kW linear amplifier including an automatic antenna tuner. Has auto-
matic tuning and band selection capability. Full break-in (QSK) operation is pos-
sible. The amplifier/power supply unit and the remote control unit are separated.
The optional OPC-599
PS-126
dc power supply
• Output voltage : 13.8 V DC
• Max. output current : 25 A
SP-21
external speaker
Designed for base station operation.
• Input impedance: 8 ø
• Max. input power: 5 W
HM-36
hand microphone
Hand microphone equipped with [UP]/
[DOWN] switches.
The same as that supplied with the
transceiver.
111
is required for connection.
adapter cable
SP-23
external speaker
4 audio filters; headphone jack; can
connect to 2 transceivers.
• Input impedance: 8 ø
• Max. input power: 4 W
SM-30
desktop microphone
Unidirectional, electret microphone for
base station operation. Includes low
cut switch and mic gain control.
CT-17
ci
For remote transceiver control using a
personal computer equipped with an
RS-232C port. You can change fre-
quencies, operating mode, memory
channels, etc., via your computer.
-
v level converter unit
AH-4
hf automatic antenna tuner
Specially designed to tune a long wire
antenna for HF/50 MHz bands. The
"PTT tune" function provides simple
operation.
• Input power rating: 120 W
AH-2b
antenna element
A 2.5 m long antenna ele-
ment for mobile operation
with the AH-4.
• F r e q u e n c y c o v e r a g e
7–54 MHz band with the
AH-4
SM-50
desktop microphone
Unidirectional, dynamic microphone for
base station operation. Includes [UP]/
[DOWN] switches, a low cut switch and
mic gain control.
FL-430
1 (6 k z)
st if filter h
FL-431
1 st if filter (3 k h z)
These filters reduce interference from
strong nearby signals.