Memory Name Programming - Icom IC-i7410 Instruction Manual

7
MEMORY OPERATION

■ Memory name programming

All Memory channels, including scan edges channels,
can be assigned an alphanumeric names of up to nine
characters each.
[EXAMPLE]: Programming a memory name into
Memory channel 99.
q Push [VFO/MEMO] to select the Memory mode.
w Push [Y] or [Z] to select Memory channel 99.
e Push [MENU] one or more times to display the "M2"
screen (Menu 2).
r Push [MEM](F-2) to display the "MEM" screen
(Memory Menu).
t Push [EDT](F-1) to display the "EDT" screen (Mem-
ory Name Edit).
• A cursor appears and blinks.
• If the channel you select is a blank channel, an error
beep sounds.
y Push [F-1] one or more times to select the desired
character type.
• See the "Character table list" below.
u Rotate [DIAL] to select the first character to input.
• When inputting numbers and a decimal point, push the
appropriate keypad key.
• Push [DEL](F-4) to delete the selected character.
• Push [SPC](F-5) to input a space.
• An error beep sounds if you try to program more than
nine characters. If you want to reprogram the name,
push [Ω](F-2) or [≈](F-3)
acter, then push [DEL](F-4) to delete it.
i Push [Ω](F-2) to move the cursor backward, or push
[≈](F-3) to move the cursor forward.
o Repeat steps y to i to program a memory name
of up to 9 characters.
!0 Push [MENU] to save the name, and return to the
"MEM" screen.
!1 Push [MENU] again to return to the "M2" screen.
Character table list
Character
type
ABC A to Z
abc a to z
! # $ % & \ ? " ' ` ^ + – ✱ ⁄ . , : ; = < > ( ) [ ] { }
etc
¦ _ ¯ @
73
to
select any undesired char-
Selectable characters
[EDT] [MEM]
[MENU]
M2
SCAN MEM SWR
14.19500
MEM
E D T (
EDT
Ω ≈
A B C
• When programing a memory name
[Ω] [≈]
[F-1] [DEL]
[EXAMPLE]: Programming "DX spot" into Memory
channel 99.
Character type Cursor
EDT
D X s p o t
a b c
Ω
[√] [∫] [VFO/MEMO]
TCON VSC
USB
) S E L
D E L S P C
Keypad
[SPC]
[DIAL]
≈
D E L S P C
Input a space
Delete a character
Move cursor forwards
Move cursor backwards
Select character type