Status Counters - 3Com WX4400 Reference Manual

44 C 2: W
HAPTER ORKING WITH THE

Status Counters

3WXM U I
SER NTERFACE
Table 9 lists the counters displayed at the bottom of the main 3WXM
window. To obtain more information, place the cursor over a counter and
click.
Table 9 Status Counters
Alert Category Description
Config Lists the number of outstanding configuration errors and
warnings.
3WXM compares the configuration of a switch to a set of
configuration rules, and flags the items that must (error) or
should (warning) be corrected before deploying the switch
configuration from the network plan to the live network.
Click this counter (or select the Verification toolbar option) to
open the Verification tab in the Content panel. Use this tab to
correct configuration errors or disable rules.
(See "Verifying Configuration Changes" on page 377.)
Local Changes Lists the number of WX switch configuration changes that have
occurred in 3WXM (in the network plan) since the last time the
switches in the network were synchronized with their
counterparts in 3WXM.
Click this counter (or click the Devices toolbar option) to open the
Change Management tab in the Content panel. Use this tab to
review the local changes and deploy them to the network.
(See "Synchronizing Local and Network Changes" on page 365.)
Network Lists the number of WX switch configuration changes that have
Changes occurred in the live network since the last time the switches in
the network were synchronized with their counterparts in
3WXM.
Click this counter (or click the Devices toolbar option) to open the
Change Management tab in the Content panel. Use this tab to
review the network changes and upload them to 3WXM.
(See "Synchronizing Local and Network Changes" on page 365.)