Using Rf Interactive Measurement Mode; Reading The Rf Measurement Table - 3Com WX4400 Reference Manual
Wireless lan mobility system wireless switch manager
Hide thumbs
Also See for WX4400:
- Command reference manual (698 pages) ,
- Datasheet (6 pages) ,
- Configuration manual (728 pages)
Table of Contents
Advertisement
160
C
5: P
HAPTER
LANNING THE
Using RF Interactive
Measurement Mode
Reading the RF
Measurement Table
3C
M
S
OM
OBILITY
YSTEM
7 Click OK to save the changes and close the box.
8 Do one of the following:
To use the RF interactive measurement mode, see "Using RF
Interactive Measurement Mode".
To generate network design information, see "Generating RF
Network Design Information" on page 162.
Click Finish to save the changes and close the wizard.
RF interactive measurement mode is useful when you are troubleshooting
or surveying the coverage areas on the floor. You can quickly measure
signal strengths for any location on the floor.
To use the RF interactive measurement mode
1 Click the
icon in the toolbar.
2 Click any location on the floor. Received signal strength indication (RSSI)
measurements for the selected location appear next to the Floor View.
See "Reading the RF Measurement Table" for information about the
fields in the display.
The projected signal strengths for the planned equipment from that
measurement point are shown in the RF measurement table.
X-Y coordinates for the measurement point and display options are also
available to customize the RSSI table. Using this interactive mode can be
valuable when verifying deployment coverage with a portable WLAN
measurement tool on the floor.
Advertisement
Table of Contents
