3Com WX4400 Reference Manual page 178

178 C 6: C
HAPTER ONFIGURING
WX S P
YSTEM ARAMETERS
10 Configure wireless services.
Wireless services that are already configured are listed. You can modify
existing services and create new ones.
To create a wireless service:
a Click Create and select the type of service you want to create:
802.1X Service Profile—Provides wireless access to 802.1X clients.
Voice Service Profile—Provides wireless access to Voice over IP
(VoIP) devices.
Web-Portal Service Profile—Provides wireless access to clients who
log in using a web page.
Open Access Service Profile—Provides wireless access to clients
without requiring them to log in.
Custom Service Profile—Provides wireless access based on the
combination of options you choose. (Use this option only if none
of the other options applies to the type of service you want to
offer.)
b See "Viewing and Configuring Wireless Services" on page 245 for
information about wireless service parameters.
c When you are finished configuring wireless services, click Next and go
to step 10.
11 Configure basic Auto-DAP profile settings:
a To enable the Auto-DAP profile, select Enabled.
b To change the radio type the profile assumes for 802.11b/g radios in
dual-radio MAP models, select the radio type from the AP Radio Type
drop-down list:
11b
11g
12 Click Finish.