Refreshing Client Data - 3Com WX4400 Reference Manual

Refreshing Client
Data
1 Select a user on the Client(s) Result screen.
3WXM refreshes client monitor data at regular intervals (every 5 minutes
by default). The administrator can specify the refresh rate using the client
monitor polling interval. (See "Changing Monitoring Settings" on
page 510.) Click the refresh icon
The counters are incremented each time the 3WXM service receives a
client activity trap generated by an WX switch. The counters represent
activity for all clients within the selected scope.
Performing an RF Link Test
Running an RF Link Test can provide a quick, simple summary and
breakdown of basic RF statistics for troubleshooting wireless performance
problems.
When the RF Link Test is started, it sends 20 null data packets from the
associated MAP to the client and returns the following information:
Number of null data packets sent
Number of null data packets received and acknowledged
Transmission time for each null packet
Indication of signal strength relative to the MAP
Signal-to-noise ratio (SNR)
To perform an RF Link Test
OR
In the Client Monitor panel, select a user from the table.
Using the Client Summary View
to refresh the data on demand.
461