3Com WX4400 Reference Manual page 88

88 C 5: P
HAPTER LANNING THE
3C M S
OM OBILITY YSTEM
The operating tips in the previous table refer to specific command names
in AutoCAD. The commands are mentioned in 3WXM documentation as
a guide for finding the appropriate commands or options in your CAD
application. However, the best source of information about how to use
your CAD application is the user documentation for that application.
Table 14 Common AutoCAD Layer Names
AutoCAD Layer Name
glaz
scol
p-fixt
p-part
partitions
Importing the Drawing
To import a floor drawing:
1 Select the RF Planning tool bar option.
2 In the Organizer panel, click on the plus sign next to the building to
expand it, then click on the name of the floor for which you are
importing the drawing. An empty floor layout appears in the Content
panel.
3 In the Task List panel, under RF Planning, select Import Floor Layout.
4 After navigating to the directory containing the drawing, select it, and
click Open. The drawing appears.
After importing a drawing, 3WXM remembers the chosen
directory.
If you originally imported a DXF or DWG file, you can import a DXF,
DWG, GIF, or JPEG file and layer it over the original file.
When you import another file, you are asked whether you want to delete
the existing layout or add the objects to the existing layout. If you are
reimporting the original file, 3WXM adds only incremental changes to the
existing layout.
5 Read the message about verifying the drawing scale, then click OK.
("Adjusting the Scale of a Drawing" on page 91 describes how to adjust
the scale.)
The imported drawing is displayed in the Content panel.
Commonly Represents...
windows
steel columns
bathroom
bathroom stall
ext – exterior
int – interior