3Com WX4400 Reference Manual page 267

802.11g—1.0, 2.0, 5.5, 6.0, 9.0, 11.0, 12.0, 18.0, 24.0, 36.0,
48.0, 54.0
The default depends on the radio type:
802.11a—6.0, 12.0, and 24.0
802.11b—1.0, and 2.0
802.11g—1.0, 2.0, 5.5, and 11.0
Supported rates—Rates that are not mandatory but that the radio can
nonetheless use to send data. By default, all valid rates that are not
mandatory are still supported.
Disabled rates—Data transmission rates that MAP radios will not use
to transmit data. This setting applies only to data sent by the MAP
radios. The radios will still accept frames from clients at disabled data
rates. By default, none of the data rates are disabled.
All rate settings apply specifically to data rates used by radios for
transmission. Radios can accept frames from a wireless client at any valid
rate.
SODA Tab
The SODA tab has settings for the Sygate On-Demand (SODA) feature.
SODA is an endpoint security solution that allows enterprises to enforce
security policies on client devices without having to install any special
software on the client machines. WX switches can be configured to run
SODA security checks on users' machines as a requirement for gaining
access to the network.
Sygate on Demand—Enables or disables SODA on the SSID of the
service profile. When SODA functionality is enabled for a service
profile, a SODA agent is downloaded to clients attempting to connect
to a MAP managed by the service profile. The SODA agent performs a
series of security-related checks on the client.
Enforce checks—Enables or disables the enforcement of the SODA
security checks, so that the client is allowed access to the network
immediately after the SODA agent is downloaded, rather than waiting
for the security checks to be run.
Remediation ACL—ACL to be applied to a client if it fails the checks
performed by the SODA agent.
Failure Page—Name of the web page served to the user's browser if
the user's computer fails one of the SODA agent checks.
Viewing and Configuring Wireless Services 267