3Com WX4400 Reference Manual page 306

306 C 8: C
HAPTER ONFIGURING
A , A
UTHENTICATION UTHORIZATION
Table 22 Authentication Attributes for Local Users (continued)
Attribute
filter-id
(network access mode
only)
idle-timeout
, A
AND CCOUNTING
Description Valid Value(s)
Inbound or If configured in the WX switch's local
outbound ACL to database, this attribute can be an
apply to the user. access control list (ACL) to filter
outbound or inbound traffic. Use the
following format:
inboundacl.in
or
outboundacl.out
If you are configuring the attribute on
a RADIUS server, the value field of
filter-id can specify up to two ACLs.
Any of the following are valid:
(Each example goes on a single line on
the server.) The format in which to
specify the values depends on the
RADIUS server.
Regardless of whether the attributes
are defined locally or on a RADIUS
server, the ACLs must already be
configured on the WX switch.
(For more information, see "Mapping
an ACL" on page 238.
This option is not implemented in the current MSS version.
P
ARAMETERS
filter-id = "Profile=acl1"
filter-id = "OutboundACL=acl2"
filter-id = "Profile=acl1
OutboundACL=acl2"