Example 3: Deployment Site Has Dns But No Dhcp - 3Com WX4400 Reference Manual

352 C 9: C
HAPTER ONFIGURING
Example 3:
Deployment Site Has
DNS But No DHCP
WX S R
WITCHES EMOTELY
The deployment site in this example does not have a DHCP server but
does have a local DNS server. The configuration is similar to Example 1,
but includes DNS configuration information instead of an IP alias.
1 Configure a VLAN:
W X1200# set vlan 1 port 7
s ucces s : change accept ed.
2 Configure an IP interface on the VLAN.
W X1200# set interface 1 ip 192.168.1.252 255.255.255.0
s ucces s : change accept ed.
3 Configure a default route through the local default router:
W X1200# set ip route default 192.168.1.1 0
s ucces s : change accept ed.
4 Configure the default DNS domain name:
W X1200# set ip dns domain example.com
D om ai n nam e changed
5 Configure DNS server information:
W X1200# set ip dns server 192.168.11.2
6 Enable the MSS DNS client:
W X1200# set ip dns server enable
s ucces s : change accept ed.
7 Enable the auto-config option:
W X1200# set auto-config enable
s ucces s : change accept ed.
8 Save the configuration changes:
W X1200# save config
s ucces s : conf i gur at i on s aved.
9 Power off or restart the switch.