3Com WX4400 Reference Manual page 139

5 In the Name box, type a name for the access point. You can use 1 to 32
characters, with no punctuation except the following: period (.), hyphen
(-), or underscore (_).
6 Optionally, in the Manufacturer ID box, type the manufacturer
identification for the access point (1 to 30 characters, with no spaces).
7 In the Product ID box, type the product identification for the access point
(1 to 30 characters, with no spaces).
8 In the IP Address box, type the IP address for the access point.
If you specify an IP address, you can use Telnet and a Web browser with
this access point.
9 In the Telnet Port Number box, specify the port number for Telnet service.
10 In the HTTP Port Number box, specify the port number for HTTP service.
11 Click Next. The following dialog appears:
Placing Third-Party Access Points 139