Changing Network Synchronization Options; Changing User Interface Options - 3Com WX4400 Reference Manual

492 C A: C
HAPTER HANGING
Changing Network
Synchronization
Options
Changing User
Interface Options
3WXM P
REFERENCES
By default, 3WXM checks for configuration changes, events, and status
changes on WX switches. You can configure checking (also called polling) for
configuration changes in the network made with the CLI, Web View, or
another instance of 3WXM.
If you do not enable this option, you still can manually synchronize
3WXM with WX switches using the Devices tab. (Select the Devices
option from the toolbar in the main 3WXM window. See "Synchronizing
Local and Network Changes" on page 365.)
To change network options
1 Select Tools > Preferences. The Preferences dialog box appears.
2 Click the Network tab.
3 To set the amount of time that 3WXM waits for a connection to be
established to a WX before trying to connect again, specify the timeout
(1 to 30 seconds) in the Connect Timeout box. The default is 5 seconds.
4 To set the number of times (0 to 5) 3WXM tries to reconnect to the WX
after the original attempt, specify the value in the Retry Count box. The
default is 3 times.
For example, if the retry count is 3, 3WXM attempts to establish a
connection to a WX four times. If you specify 0, 3WXM does not attempt
to establish a connection if the first attempt is unsuccessful.
5 Click Close to close the Preferences dialog box, or click another tab to
continue making changes.
You can change the following user interface options:
Confirmation prompt when closing wizard pages
Window style for exploring the topological view in the main 3WXM
window
Size of icons in 3WXM
Placement of the wizard index in wizard dialog boxes
To change 3WXM user interface options:
1 Select Tools > Preferences. The Preferences dialog box appears.
2 Click the UI tab.