3Com WX4400 Reference Manual page 252

252 C 7: C
HAPTER ONFIGURING
W P
IRELESS ARAMETERS
Editing the name is optional if this is the first service of this type you are
configuring on the switch.
4 Type the SSID name in the SSID box.
5 Click Next.
6 Select the security modes you want the SSID to support. You can select
one or more of the following:
RSN (WPA2)
WPA
Dynamic WEP
7 Click Next.
8 If you selected RSN or WPA in step 6, select the encryption algorithms to
use. Otherwise, go to step 11.
AES (CCMP)—Usually used with RSN (WPA2)
TKIP—Usually used with WPA
WEP-104—Used with dynamic WEP
WEP-40—Used with dynamic WEP
9 Click Next.
10 Select the EAP type:
EAP-MD5 Offload
PEAP Offload
Local EAP-TLS
External RADIUS Server
If you select PEAP, the EAP Sub-Protocol is MS-CHAPV2. For other
protocols, the EAP Sub-Protocol is None.
(For information, see "EAP Type (802.1X Only)" on page 249.)
11 Specify the authentication method (RADIUS server group or local
database).
(For information, see "AAA Methods (RADIUS Server Groups and the
Local User Database)" on page 250.)
12 Click Next.
13 To assign a default VLAN to the SSID, select the VLAN from the VLAN
Name drop-down list.