3Com WX4400 Reference Manual page 512

512 C B: C
HAPTER HANGING
3WXM S P
ERVICES REFERENCES
5 To change settings for client-session data collection:
a Select Enable Client Session Collection. This option is enabled by
default.
b To change the number of minutes between data queries, change the
value in the Polling interval box. You can specify 5, 10, or 15 minutes.
The default is 5 minutes.
6 To change settings for traffic and RF data collection:
a Select Enable Traffic & RF Trending. This option is enabled by
default.
b To change the number of minutes between data queries, change the
value in the Polling interval box. You can specify 5, 10, or 15 minutes.
The default is 5 minutes.
c To change the RF Threshold Settings, enter new settings for the
following statistics [default settings are indicated in brackets]:
Radio Retransmit Threshold (%) [10]
Radio Noise Floor Threshold (dBm) [-85]
Radio Signal Level Threshold (dBm) [-75]
Utilization Threshold (%) [80]
SNR Threshold (dBm) [15]
Number of Clients per Radio [15]
7 To change settings for Intrusion Detection System (IDS) and Denial of
Service (DoS) data collection:
a Select Enable Rogue Detection. This option is enabled by default.
b To change the number of minutes between data queries, change the
value in the Polling interval box. You can specify 5, 10, 15, or 30
minutes. The default is 5 minutes.
8 Click Save to save the changes.