3Com WX4400 Reference Manual page 177

Authenticated—SNMP message exchanges are authenticated but
are not encrypted. (This security level is the same as the authNoPriv
level described in SNMPv3 RFCs.)
Encrypted—SNMP message exchanges are authenticated and
encrypted. (This security level is the same as the authPriv level
described in SNMPv3 RFCs.)
f Click Next.
g Type the USM name or community string name in the corresponding
box.
h Select the access type from the Access Type drop-down list:
read-notify—An SNMP management application using the string
can get object values on the switch but cannot set them. The
switch can use the string to send notifications.
notify-only—The switch can use the string to send notifications.
read-write-notify—An SNMP management application using the
string can get and set object values on the switch. The switch can
use the string to send notifications.
i Click Next.
8 Configure VLANs.
VLANs that already exist, such as the default VLAN, are listed. You can
modify existing VLANs and create new ones.
To create a VLAN:
a Click Create. The Create VLAN wizard appears.
b See "Viewing and Configuring VLANs" on page 215.
c When you are finished configuring VLANs, click Next and go to
step 9.
9 Configure RADIUS servers and server groups.
RADIUS servers that are already configured are listed. You can modify
existing servers and groups and create new ones.
To create a RADIUS server and place it in a group:
a Click Create. The Create RADIUS Server wizard appears.
b See "Viewing and Configuring RADIUS Settings" on page 311.
c When you are finished configuring RADIUS settings, click Next and go
to step 10.
Setting Up a Switch 177