3Com WX4400 Reference Manual page 167

Table 16 WX Switch Object Types (continued)
Category Object Type
System, cont. VLANs
ACLs
QoS
Wireless Wireless
Services
Radio Profiles
Auto-DAP
Access Points
Radios
WX Switch Configuration Objects
Description
Groups of physical ports configured as a
distinct Layer 2 broadcast domain. Each VLAN
has its own Spanning Tree Protocol (STP) and
Internet Group Management Protocol (IGMP)
settings. Optionally, a VLAN can be associated
with an IP interface.
(See "Viewing and Configuring VLANs" on
page 215.)
Access Control Lists (ACLs) to filter traffic
(See "Viewing and Configuring ACLs" on
page 230.)
Mappings between Differentiated Services
Code Point (DSCP) values and internal Class of
Service (CoS) values
(See "Viewing and Changing CoS Mappings"
on page 241.)
Settings for SSIDs to provide network services.
Wizards are provided for configuring the
following types of services: 802.1X, voice, Web
Portal, open access, and custom.
(See "Viewing and Configuring Wireless
Services" on page 245.)
Sets of radio parameters that can be applied to
multiple radios, including the beacon interval,
RF Auto-Tuning settings, and service profiles
(See "Viewing and Configuring Radio Profiles"
on page 272.)
Settings for the Auto-DAP profile
(See "Viewing and Changing the Auto-DAP
Profile" on page 279.)
Settings for MAPs
(See "Viewing and Configuring MAPs" on
page 281.)
Settings for individual MAP radios
(See "Viewing and Changing Radio Settings"
on page 292.)
167