Verifying That The 3Wxm Client Is Receiving Service Data - 3Com WX4400 Reference Manual

Verifying that the
3WXM Client is
Receiving Service
Data
When you use this option, the Certificate Check dialog box is not shown
again for the certificate, even if the certificate becomes out of date.
2 Click Accept.
To reject the certificate and refuse the connection, click Reject. The
3WXM ends the connection.
The Certificate Check dialog box is redisplayed each time the 3WXM
Client attempts to establish a connection with 3WXM Services.
If you are using a network plan that already contains equipment, use the
following procedure to verify that the 3WXM Client is receiving data for
the equipment.
1 Select the network plan name in the Organizer panel.
2 Select the Monitor tool bar option. The monitor dashboard appears.
3 Wait 60 seconds for 3WXM to retrieve updates from the server.
4 Click Details under Status Summary.
5 Check the status colors of the equipment:
Green—Up
Yellow—Up (but with minor service degradation)
Orange—Up (but with major service degradation)
Red—Down
Blue—Unknown (3WXM is not receiving status data from the server
yet.)

Verifying that the 3WXM Client is Receiving Service Data

507