Displaying The System Status; System Debugging - 3Com 4200G 12-Port Configuration Manual

Entering System View
from User View
Displaying the System
Status

System Debugging

Enabling/Disabling
System Debugging
Perform the following configuration in user view.
Table 315 Enter system view from user view
Operation Command
Enter system view from system-view
user view
You can use the following display commands to check the status and configuration
information about the system. For information about protocols and ports, and the
associated display commands, refer to relevant sections.
Perform the following operations in any view.
Table 316 System display commands
Operation Command
Display the current date display clock
and time of the system
Display the version of display version
the system
Display the information display users [ all ]
about user terminal
interfaces
Display the debugging display debugging [ interface
status { interface-name | interface-type
interface-number } ] [ modu name ]
The Ethernet switch provides a variety of debugging functions. Most of the protocols
and features supported by the Ethernet switch are provided with corresponding
debugging functions. These debugging functions are a great help for you to diagnose
and troubleshoot your switch system.
The output of debugging information is controlled by two kinds of switches:
Protocol debugging, which controls whether the debugging information of a
■
protocol is output.
Terminal display, which controls whether the debugging information is output to a
■
user screen.

Displaying the System Status 367

Description
—
Description
—
—
—
Optional
By default, all debugging
is disabled in the system.