3Com WX4400 Reference Manual page 382

382 C 11: V
HAPTER ERIFYING
C C
ONFIGURATION HANGES
6 Reenable the rule or instances:
To reenable a rule all of whose instances are disabled, click on the
checkbox in the Enabled column. The Disable All Instances option is
deselected.
To reenable an individual instance of a rule, click on the checkbox next
to the instance. Repeat for each instance you want to reenable.
Alternatively, if you want to reenable all of the disabled instances,
click on the checkbox in the Enabled column.
7 Go to step 10.
8 Click on the checkbox in the Enabled column. The disable options
become editable. By default, the Disable All Instances option is
selected.
9 To leave all instances disabled, go to step 10.
To disable only specific instances:
a Select Disable Selected Instances. The individual instances of the
rule are listed.
b Click next to the instances you want to disable, then go to step 10.
10 Click Close.