Changes; Synchronizing When The Network And 3Wxm Have Nonmatching Changes - 3Com WX4400 Reference Manual

368 C 10: M
HAPTER ANAGING
Synchronizing When
the Network and
3WXM Have
Nonmatching

Changes

WX S I
YSTEM MAGES AND
4 In the Task List panel in the Local Changes group, click Schedule
Deploy. The Schedule Deploy dialog box appears.
5 Edit the start date and time.
(The date and time are based on the date and time on the machine
where 3WXM Services is installed.)
6 Click OK.
If a WX switch in the network has configuration changes and the
counterpart in the network plan also has changes but the changes are
different, you still can synchronize the changes.
The Devices tab indicates that both the network and the network plan
have nonmatching changes in the following ways:
When you select the WX switch, the links in both the Local Changes
and Network Changes groups of the Task List panel become active.
When you click Deploy, the deployment is not performed and the
following message is displayed instead: wx is not synchronized.
To synchronize the changes, do one of the following:
Review and either deploy (local changes) or accept (network changes),
then review and either deploy or accept the other set of changes.
Reject one set of changes (local or network) and accept or deploy the
other set of changes.
Reject both sets of changes.
C
ONFIGURATIONS