Changing A Dscp-To-Cos Mapping; Changing A Cos-To-Dscp Mapping - 3Com WX4400 Reference Manual

242 C 6: C
HAPTER ONFIGURING
Changing a
DSCP-to-CoS
Mapping
Changing a
CoS-to-DSCP
Mapping
WX S P
YSTEM ARAMETERS
To change the mapping between a DSCP value in an ingress packet and
its internal CoS value:
1 Access the QoS tables:
a Select the Configuration tool bar option.
b In the Organizer panel, click the plus sign next to the WX switch.
c Click the plus sign next to System.
d Select QoS.
2 In the CoS column of the DSCP to CoS table, use the arrows to select the
new value or type the new value.
3 Click Save.
To change the mapping between an internal CoS value and the DSCP
value that is marked in egress traffic:
1 Access the QoS tables:
a Select the Configuration tool bar option.
b In the Organizer panel, click the plus sign next to the WX switch.
c Click the plus sign next to System.
d Select QoS.
2 In the DSCP column of the CoS to DSCP table, use the arrows to select
the new value or type the new value.
3 Click Save.