3Com WX4400 Reference Manual page 496

496 C A: C
HAPTER HANGING
3WXM P
REFERENCES
To Change a Color
1 Select Tools > Preferences. The Preferences dialog box appears.
2 Click the RF tab.
3 Select one of the following tabs:
802.11a Channel Colors
802.11b/g Channel Colors
RF Obstacle Colors
Data Rate Colors
RSSI Band Colors
SNR Band Colors
Load Band Colors
Probability Colors
4 Click on the color column for the color you want to change. The Choose
Color dialog box appears.
See one of the following sections:
For more information about using the color palette, see "Defining a
Color from the Palette" on page 496.
For more information about using HSB, see "Defining a Color by
Changing HSB Properties" on page 497.
For more information about using RGB, see "Defining a Color by
Changing RGB Properties" on page 498.
Defining a Color from the Palette
1 To specify a color using the color palette, click Swatches in the Choose
Color dialog box.
2 From the color palette, click the color you want to see. Repeat until you
find the color you want.
In the Preview box, you can see the swatches and text in the color you
chose.
The Recent box shows the colors you have chosen so far. Click Reset to
choose the original predefined color and clear the Recent box.
3 Click OK to accept the color you last chose. The RF tab in the Preferences
dialog box is active.