3Com WX4400 Reference Manual page 161

Table 15 shows the information available in the RF measurement table.
Table 15 RF Measurement Information
Item
X
Y
Show Unreachable APs
Show Disabled APs
Show APs on Other
Floors
MAP/AP
Distance
Channel
RSSI (dBm)
Status
Verifying the Wireless Network
Value
Distance in the X direction from the 0,0 coordinate (the
upper left corner of the panel).
Distance in the Y direction from the 0,0 coordinate (the
upper left corner of the panel).
Show MAPs that are too far away to accurately measure
signal strength.
Show all disabled MAPs.
Show the MAPs located on other floors that can be
detected from this RF measurement point.
MAP or third-party access points detected.
Distance between MAP and RF measurement point.
Channel of the MAP or third-party access point.
Signal strength from the MAP at the RF measurement
point.
Whether the MAP is active (OK) or disabled.
161