Viewing And Configuring 802.1X Network Access Rules; Viewing 802.1X Network Access Rules - 3Com WX4400 Reference Manual

320 C 8: C
HAPTER ONFIGURING
Viewing and
Configuring 802.1X
Network Access
Rules
Viewing 802.1X
Network Access Rules
A , A
UTHENTICATION
14 To specify the number of seconds MSS retains session information for
Bonded Auth™ (bonded authentication) purposes for an authenticated
machine while waiting for the 802.1X client on the machine to start
(re)authentication for the user, specify the value, from 1 to 300 seconds,
in the Bonded Period box. The default is 0 seconds.
15 Click Save.
This section describes how to view and configure 802.1X rules for user
network access.
To configure other types of network access rules, see the following:
"Viewing and Configuring MAC Network Access Rules" on page 324
"Viewing and Configuring WebAAA Network Access Rules" on
page 327
"Viewing and Configuring Last-Resort Network Access Rules" on
page 330
To configure access rules for administrative access to the WX itself, see
"Viewing and Configuring WX Administrator Access Rules" on page 332.
This section assumes that you are familiar with the AAA options in MSS.
For detailed information, see the "Configuring AAA for Network Users"
chapter of the Wireless LAN Switch and Controller Configuration
To view 802.1X network access rules:
1 Select the Configuration tool bar option.
2 In the Organizer panel, click the plus sign next to the WX switch.
3 Click the plus sign next to AAA.
4 Select 802.1X Access Rules.
The configured 802.1X network access rules appear.
, A
UTHORIZATION AND CCOUNTING
P
ARAMETERS
Guide.