3Com WX4400 Reference Manual page 237

3 Select or type the ICMP message type in the Type box. (See Table 17.)
4 Select or type the ICMP message code in the Code box. (See Table 17.)
5 Click OK.
Table 17 ICMP Messages and Codes
ICMP Message (Type Number)
Echo Reply (0)
Destination Unreachable (3)
Source Quench (4)
Redirect (5)
Echo (8)
Time Exceeded (11)
Parameter Problem (12)
Timestamp (13)
Timestamp Reply (14)
Information Request (15)
Information Reply (16)
To disable the capture option:
If an ACE has the capture option, you can disable the option by selecting
the ACE, then selecting Disable Capture for this rule in the Task List panel.
The portalacl ACL, created automatically when you enable Web Portal,
uses the capture option in one of its rules. Do not disable the capture
option in this rule unless you are certain you need to do so. If the rule
does not have the capture option, the Web Portal user never receives a
login page.
Viewing and Configuring ACLs
Code (Number)
None
Network Unreachable (0)
Host Unreachable (1)
Protocol Unreachable (2)
Port Unreachable (3)
Fragmentation Needed (4)
Source Route Failed (5)
None
Network Redirect (0)
Host Redirect (1)
TOS and Network Redirect (2)
TOS and Host Redirect (3)
None
TTL Exceeded (0)
Fragment Reassembly Time Exceeded
(1)
None
None
None
None
None
237