Toolbar Options; Filtering The Message List; Resolving An Error Or Warning - 3Com WX4400 Reference Manual

378 C 11: V
HAPTER ERIFYING

Toolbar Options

Filtering the Message
Resolving an Error
or Warning
C C
ONFIGURATION
Table 27 lists the options on the toolbar of the Verification panel.
Table 27 Toolbar Options on Verification Panel
Option
3WXM
Launch
HTML Help
Run
Configuration
and Network
Verification
Edit Verification
Options
By default, all warning and error messages are listed. You can use the
List following options to filter the message list:
Show Errors—Error messages are listed only when this option is
selected.
Show Warnings—Warning messages are listed only when this option
is selected.
Show Disabled—Disabled rules are listed only when this option is
selected. (See "Disabling a Rule from the Message List" on page 379.)
For most errors and warnings, 3WXM provides a link to edit the
configuration information that caused the error or warning. The link
appears in the Resolutions section of the panel, under the Messages
column. When you click the edit link, 3WXM opens the configuration
wizard for the configuration item.
For example, if you create a new WX switch called dang-wxr100 but you
do not specify the system IP address of the switch, the error message
System IP address is not assigned or is invalid appears in the Message
area. To correct the error, click on Edit dang-wxr100 in the Resolutions
section. The Modify WX switch wizard appears. Use the wizard to edit
the System IP address. After saving the configuration change, 3WXM
reevaluates the configuration. If the system IP address is specified, the
error no longer appears in the Verification panel.
HANGES
Description
Opens the HTML version of this manual
Refreshes the data for all devices.
Displays the Verification Options dialog box, which enables you to
change verification options and disable or reenable rules. (See
"Changing Verification Options" on page 440.)