3Com WX4400 Reference Manual page 310

310 C 8: C
HAPTER ONFIGURING
A , A
UTHENTICATION UTHORIZATION
Table 22 Authentication Attributes for Local Users (continued)
Attribute
url
(network access mode
only)
vlan-name
(network access mode
only)
acct-interim-interval lnterval in seconds
, A
AND CCOUNTING
Description Valid Value(s)
URL to which the Web URL, in standard format. For
user is redirected example:
after successful
http://www.example.com
WebAAA.
You must include the http:// portion.
Virtual LAN (VLAN) Name of a VLAN that you want the
assignment. user to use. The VLAN must be
configured on a WX switch within the
VLAN-Name is a
Mobility Domain to which this WX
3Com
switch belongs.
vendor-specific
attribute (VSA). The
vendor ID is 43,
and the vendor
type is 1.
On some RADIUS
servers, you might
need to use the
standard RADIUS
attribute
Tunnel-Pvt-Group-I
D, instead of
VLAN-Name.
Number between 180 and 3,600
between seconds, or 0 to disable periodic
accounting accounting updates.
updates, if
The WX switch ignores the
accounting is
acct-interim-interval value and issues a
enabled and the
log message if the value is below 60
Start-Stop record
seconds.
type is specified.
Note: If both a RADIUS server and the
WX switch supply a value for the
acct-interim-interval attribute, then
the value from the WX switch takes
precedence.
P
ARAMETERS