3Com WX4400 Reference Manual page 278

278 C 7: C
HAPTER ONFIGURING
W P
IRELESS ARAMETERS
Radio Selection Tab
The Radio Selection Tab lists the radios managed by the radio profile. A
radio can be managed by only one radio profile.
To add a radio to the radio profile, select the radio in the Available
Members list. Click Add to move the radio to the Current Members list.
To remove a radio from the radio profile, select the radio in the Current
Members list. Click Reset to Default to return the radio to the default
radio profile.
If the Available Members list is empty, no MAPs have been configured for
the switch yet. To configure MAPs, see "Configuring a Directly Connected
MAP" on page 284 and "Creating a Distributed MAP" on page 282. After
configuring the MAPs, return to this wizard page to apply the radio
profile to radios.
Voice Configuration Tab
The Voice Configuration tab lists settings for VoIP services:
QoS Mode—Classification and marking of high priority traffic on the
WX and MAP:
WMM—Classifies, marks, and forwards traffic for Wi-Fi
Multimedia (WMM) devices based on 802.1p and DSCP values.
SVP—Optimizes forwarding of SpectraLink Voice Priority (SVP)
traffic by setting the random wait time a MAP radio waits before
transmitting the traffic to 0 microseconds.
The SVP QoS mode also requires an ACL to mark CoS in the SVP traffic.
The ACL is automatically configured by 3WXM when you use the Voice
Service Profile wizard with the SVP vendor option.