Preparing The Host System; Esd Precautions - Qlogic BR-815 Quick Start Manual

BR-815, BR-825 Fibre Channel Host Bus Adapter Quick Start Guide

Preparing the Host System

Preparing the Host System
1. Make a backup of the system data.
2. Power down the host system. Unplug all power cords and network cables.
3. Remove all covers necessary to access the PCIe
install the adapter. Refer to your system documentation to locate PCIe slots
and cover removal procedures.
4. Remove the blank bracket panel that covers the PCIe slot in which you want
to install the adapter. If the panel is secured with a screw, remove the screw
and save it for securing the adapter bracket panel into the slot.

ESD Precautions

When handling the adapter, use correct electrostatic discharge (ESD) procedures:

Wear a wrist grounding strap connected to chassis ground (if host is plugged
in) or a bench ground.

Store the adapter in anti-static packaging.
NOTE
Install adapters in PCI-Express slots that use an x8 lane transfer
interface or greater for best performance. You cannot install adapters
into PCI™ or PCI-X™ slots.
2
®
slot in which you want to
BR0054507-00 B