B
Solaris Driver, nxflash
Utility, and Firmware
Installation
QLogic Adapter Driver Installation
To extract and install the Solaris QLogic adapter driver using the
Sol<ver>_ntxn_1.7.tar.gz
1.
Unzip the driver package file using the
2.
Untar the driver package file using the
3.
Remove any previous driver version.
a.
b.
4.
Install the new driver, pointing to the directory where
For example:
pkgadd –d /tmp/Sol<ver>_ntxn_1.7/Solaris
5.
Type the following to make sure that the package is installed:
pkginfo –l NTXNxge
NE0154601-00 A
package:
Type one of the following commands:
For a 64-bit operating system (OS), type:
pkgchk –l –p /kernel/drv/amd64/ntxn
For a 32-bit OS, type:
pkgchk –l –p /kernel/drv/ntxn
For both OSes, type the following commands:
pkgchk –l NTXNxge
pkgrm NTXNxge
command.
gunzip
command.
tar xfp
/NTXNxge
is located.
B-1