9–Fibre Channel Over Ethernet
FCoE Boot from SAN
Prepare QLogic Multiple Boot Agent for FCoE Boot
1.
During POST, press CTRL+S at the QLogic Ethernet Boot Agent banner to
invoke the CCM utility.
2.
Select the device through which boot is to be configured ().
NOTE
When running in NIC Partitioning (NPAR) mode, FCoE boot is supported
only when the first function on each port is assigned an FCoE personality.
FCoE boot is not supported when the FCoE personality is assigned to any
other function.
Figure 9-1. FCoE Boot<Variable>—CCM Device List
119
83840-546-00 E